Skip to main content

What Tools Are Needed for 5G mmWave Testing?


5G is a new generation of wireless technology, which is expected to be the next big thing in communications. It is a technology that promises much faster data transmission speeds to devices and the Internet. For 5G to work, it will require new spectrum bands, which are not currently available. 5G will use millimeter waves (mmWave) to transmit and receive data to get around this problem. Here are the tools that you will need for 5G mmWave testing.

Antenna Array

An antenna array is a group of antennas that work together to receive signals from multiple points in space at once and then use them as input for your simulation model. Each antenna in an antenna array works individually to collect signals, but when these signals are combined, you can simulate how 5G mmWave coverage will behave around your area.


A receiver is a device that receives signals and then sends them to your simulation model. Receivers are used in both the mmWave and microwave bands, so you will have a lot of options for choosing one that works with your simulation model.


A transmitter is a device that emits signals and then receives them from your simulation model. Transmitters are typically used in the microwave band, so if you need one for 5G mmWave testing, you will need to choose one that suits your needs.


Simulators are used to test wireless devices and simulate their performance in real-world environments before being installed in the field. Simulators have become more advanced over time because you can use them to test multiple types of devices at once. This makes them very useful for testing 5G mmWave coverage and other wireless technologies such as 5G, 4G LTE, and Wi-Fi.


If you are testing wireless devices, you will need to choose an antenna that suits your needs and budget. Most antennas operate at different frequencies and can be used for 4G LTE and 5G mmWave testing. You will also need to choose an antenna with a specific gain and the maximum amount of power it can absorb from the transmitter to amplify the signal. Also, note that antennae tools manufacturers, like MilliBox, can use different types of antennas, such as Yagi, in-line, and patch antennas.

Scroll to Continue

As you can see, there are a lot of tools and equipment that you will need to test 5G mmWave coverage. While it may seem like an overwhelming task, the list above is just the tip of the iceberg, and there are many ways to test 5G mmWave coverage. For example, some people may do it with only a laptop, mobile phone, and a few tools. Others may need to purchase every single piece of equipment listed above. Whatever your situation, you will want to make sure that you use the right tool for the job to get accurate results.

Related Articles