Andrea is a handmade jewelry designer and is an aspiring jewelry design student at Ashworth College and New York Institute of Art & Design.
Images of the Design
This is a tutorial explaining how to create a simple pair of earrings that are not too heavy in weight and are not too long. The design is also beginner-friendly for all ages and is made by hand plus it does not require much effort or time to make.
What You Will Need
- 2 light pink or dark pink Bead Gallery Amethyst Crackle Quartz Nugget Beads 15mm
Sizes of the Amethyst Crackle Quartz Nugget Beads may vary.
It is natural for some of the stones to be see through.
- 2 Bead Landing Headpins
- 2 Bead Landing Fishhook Ball Coil Earring Wires
- 2 Bead Landing Clear Flower Earring Backers
Round Nose Pliers
Round Nose Pliers (it is the white one in the image above)
The toolset in the image above is similar to the one that I have been using since I started making jewelry in 2014. The reason why I bought that toolset is I liked the price and I thought that the toolset looked beginner-friendly for me. The set in the image above looks beginner-friendly and has an awesome price for those who are starting. The pair of Round Nose Pliers that are pinkish-purple in the image above are the ones that I use. They are from an older toolset. The other tools will be used in future tutorials.
6 Inch (15.24cm) To 12 Inch (30.48cm) Ruler
6 inch (15.24cm) to 12 inch (30.48cm) ruler to measure the eye pins/headpins. I prefer to use a clear ruler to measure the eye pins/headpins, but a wooden ruler works as well. Some of the best places to find them are Walmart, Target, Office Depot, and of course Michael's Arts and Crafts Stores.
How to Make Them
Find two headpins that look like they are about one inch in length. Measure them to see if they are one inch in length or close to it. If they are not about one inch keep going until you find two that are about one inch in length.
Put the beads on an headpin that is around one inch in length. Repeat for the other earring. Leave some space at the top for making the loop in Step 3.
Some Reference Images
Once that is done, using a pair of round-nose pliers to make a loop at the top for the fishhook and place the fishhook in the hole. Repeat for the other earring. To keep it in place in the ear use a backer to keep it from coming out for both earrings. See photos above for reference.
You can make each earring longer by adding more beads and use a longer eye pin/headpin if desired. In addition you can also use three inch eyepins/headpins. The images for them are below. I chose silver for the project but you can try copper, gold, or just about any color. Get creative with it!
Images of Three Inch Eyepins/Headpins
I hope that you enjoyed the tutorial and are going to try to make the earrings.
Photo Credits and Product Links
All supplies are found online and in stores at Michael's Arts and Crafts Stores. Also, my images are screenshotted online from the Micheal's Arts and Crafts Store Website. All photo credits go to Michael's Arts and Crafts Stores. The images that are mine are the pictures of what the designs look like, the tools, and the supplies used. They are watermarked with @andreasfreelancewriting. That is the Instagram account that I created mainly for my freelance writing work.
This content is accurate and true to the best of the author’s knowledge and is not meant to substitute for formal and individualized advice from a qualified professional.
© 2021 Andrea Partanen