Writing is one of my several hobbies, and lists like the one below help me with writer's block every now and again.
Baiting Your Mousetrap Properly
Using the right bait on your mousetrap is an often overlooked key to success when trying to get rid of these pesky rodents. Traps are still a great tried and true method of dealing with mice, but only if you know what bait to use. They're lots of ways to bait a mousetrap, but only one way (I've found) that works the best.
Baiting a mousetrap with the intent of getting rid of a rodent intruder can seem like an easy task. You do a quick search online to find that everyone swears by peanut butter, you put a big swab of it on the trigger, set out the trap and patiently wait until the next day so you can throw out the mouse. Morning comes, and you are met with disappointment. The trap is either untouched or, worse yet, the bait is gone and the trap is still set (like a thief in the night).
The reason for this is that peanut butter alone is only one part of getting rid of these clever pests. I've even found (before I knew the secret) mousetraps sprung, bait gone and trap chewed up, as if the mouse took it personal that someone had the audacity to try and kill it. The method describe below is one that I've had 100% success with over a number of years. I hope it works for you as well, and if lucky, you're problems with mice won't be a problem for long.
Signs You Have a Mouse or Rat Problem
I know this video was made by a pest control company, but it has very relevant information in it that will help you decide whether to go with a small mouse trap or a much larger trap (for rats). Putting out the wrong type of trap will affect your success rate enormously. If you go with something smaller than required, the rodent will not only escape, but in some cases destroy the trap itself (learned from personal experience). And, of course, if you go with something too big, you may end up with a big mess or failure all together.
Problems With Mice
What You're Going To Need
- For this article, I'm using the cheapest, most reliable mousetraps that VICTOR makes. There are mousetraps that are pressure sensitive (the press n' set traps) that companies like TOMCAT make that are very good as well, but much more expensive. I've used the cheap ones all my life with excellent results; you just have to be a bit more careful when setting them.
- A screwdriver and pliers will make things a lot easier when actually putting the bait in the mousetrap, as it can be a tricky process.
- Any brand or kind of smooth peanut butter will do (even the expired kind). The chunky kind can be stolen easily by mice without setting off the trap.
- Some kind of soft, flat-like dog treats (more on these below).
Why Peanut Butter Won't Work When Dealing With Mice
There are a lot of mousetrap mistakes you can make that will lower the odds of catching your target, but the biggest is putting a blob of peanut butter on the trap and thinking you're job is done. It's amazing how mice can be so light-footed as to completely lick the delicious treat off the trap without it going off. Just peanut butter won't do the trick. After seeing a video like this for the first time; I couldn't believe it, but seeing my traps empty and still set convinced me otherwise.
The Other Secret Ingredient When Setting Wooden Mousetraps
Treats like the one pictured above can usually be bought for $1.00 a bag at certain stores (I often get mine at Wal-Mart or the local Dollar Tree). There's no need to get a brand name,as you can just get the cheapest they have. The only requirement (if you want to call it that) is that the treat must be flat enough so that you can fit it into the trap and secure it well enough to where the mouse will have to pull at it to try to get it. This pulling action is how the mouse will trigger the trap.
Step 1: Preparing the Trap
Take a flat-head screwdriver and gently wedge up the claw plate enough to where you can slide the bait into it. The metal is usually soft enough where it doesn't take a lot of strength to achieve, so most people will be able to do it with no problems.
Some people suggest you wear some kind of disposable gloves when preparing the trap, but I never have. The thinking is that the scent of a human touching the trap will override the scent of the bait. I have a hard time believing this, since most mice travel quite openly in homes, but I won't talk anyone out of using gloves if they want.
Step 2: Baiting and Setting the Trap
Cut or tear a small strip of dog treat to where it will be sticking out each end of the trigger plate. Now, take your pliers and gently squeeze down until you can't pull it away (ONLY DO THIS WHILE THE TRAP IS NOT SET).
Be careful about squeezing too hard or you will crack the bait making it easier for the mouse to remove without triggering the trap. If the bait doesn't pull out of the trigger using gentle but firm pressure, you should be OK.
Next put a small amount of peanut butter inside the hole on the trigger, and you don't need much. You don't even need the amount shown in the picture; I just put that much on there so it would show up when I took the photo. Basically the peanut butter doesn't have to stick out of the hole like that.
Now you can set the trap.
Why I Like Using VICTOR Mousetraps
As you can tell from the above video, you do have to be a bit more careful when setting these more sensitive traps, but as long as you handle them carefully, most won't go off. I would actually suggest practicing setting these kinds of traps to get used to them. You can then set them off on purpose to get used to the noise and power of the kill bar striking the wood. It's better to practice before putting the bait on, because if the trap goes off prematurely, you'll have to re-bait the trap about half of the time. (JUST DON'T LET KIDS TRY TO SET THE TRAPS)
A Note About Re-Using Mousetraps
The traps shown in this article are quite cheap, so it's not really a big deal if you want to just throw away the trap along with the dead mouse attached to it. With that being said I've got some old traps (the same type mentioned in this article) that my Grandfather used back in the 1980's which still work well. As long as they still work, I re-use them.
I put on a pair of rubber gloves, pull back the catch and drop the dead rodent into a plastic bag or trash can. Then I put some alcohol on a paper towel and wipe down the trap removing any bait still left in the catch. Let it dry and put it away until you need it again.
How Mice Can Enter Your Home
Cool weather brings out the mice, and figuring out where mice can enter your home has to be a top priority unless you want to do battle with these critters on a constant basis. It really is amazing that a hole only as big as a dime is all a mouse needs to gain entry into a building. Even if you find such an opening and see no evidence of mice going in and out, it would be wise to seal it up as it will eventually be used as a doorway for some kind of animal or insect.
This content is accurate and true to the best of the author’s knowledge and is not meant to substitute for formal and individualized advice from a qualified professional.
© 2019 Don