Easy DIY Upcycle Home Decor Projects You Have to Try (With Video Instructions)
DIY Faux Palm Fronds
Things You’ll Need
- Cardstock (A4 size)
- A pair of scissors
- A glue gun
- Skewers
- Spray paint
- A glass bottle
Video Instructions
Steps for the Project
- Take an A4 size sheet and make a fold of approximately 1 cm on the shorter side.
- Keep repeating the steps as you would to make a paper fan.
- Take a pair of scissors and cut the sections between the folds of the paper.
- Take a skewer and hot glue it to the centre. You can also use glue if you don't have a glue gun.
- Using a piece of the same colour cardstock, bind the end of the paper leaf.
- Make in as many colours as you like and to style it to style it I used a glass bottle and spray painted it gold
And you are done!
DIY Upcycle Trash Cans
Things You’ll Need
- Empty cans
- Spray paint
- Masking tape
- Acrylic paint
- Paint brush
Steps for the Project
Take empty tin cans and bend them. Paint all the cans with the color of a choice. I used spray paint over here. You can also use masking tape to make patterns on the tins. That's it you are done! Style it with some for flowers or even some real ones and here is a project that is both super affordable and easy to do.
DIY Ring Organizer
Things You’ll Need
- Old box
- Any fabric or old t-shirt
- A pair of scissors
- Wrapping paper or contact paper
- Tape or glue (optional)
Video Instructions
Steps for the Project
- Take an old box and wrap it with some wrapping paper. You can also use contact paper.
- Take some fabric, I used an old t-shirt here.
- Measure the box and cut strips of the fabric. The width of the fabric was that of the width of the box.
- Make rolls of the fabric strips. I used 7 or 8 rolls for the box .
- You can use glue to stick the fabric to the bottom of the box.
And, you are done!
You now have a travel friendly DIY rings organizer. Never lose a ring again.
DIY Cactus Room Decor
Things You’ll Need
- Gold wire
- Wood slice
- Hand tools
- Glue
Video Instructions
Steps for the Project
- Take a thin gold wire and twist it on itself. If you use a thick wire you don't need to necessarily do this step.
- Bend the wire in the shape of the cactus, you can use a pair of pliers for this.
- Take a wood slice and mark two holes 3 CM apart.
- Make two holes using a screwdriver and a hammer.
- Using glue, attach the wires cactus to the wood slice.
And, you are done!
Style it in your favorite part of the room.
Final Thoughts
Hope you enjoyed these tutorials as much as I liked making them. Try them out and let me know in the comments below which one is your favorite.
This content is accurate and true to the best of the author’s knowledge and is not meant to substitute for formal and individualized advice from a qualified professional.
© 2021 PGupta0919