Lockridge enjoys reading and writing about new (and sometimes old) craft and decoration ideas.
Do you enjoy making old-fashion crafts? Spool dolls, those made from the empty thread spools, are the perfect creation for a child with an active imagination. You can leave the dolls naturally colored, or paint them to make a "shirt" and "pants" set.
Creating spool dolls is a great rainy day type of activity, that allows you and your children to something out of nothing, in a relatively quick time frame. If you don’t have any spare wooden spools in the house, scope the craft stores for a variety of shapes and sizes wooden piece options. The most difficult part of the spool doll-making process will be deciding which colors to use, and thenand deciding when to stop making the dolls (they're just so much fun!).
Things You’ll Need
One 1” ball knob
Ten 3/4-inch by 5/8-inch wooden spools
Six 12 mm wooden beads
28-inches of cording
Hot glue gun with glue
Sketch a face onto the large ball knob with a pencil. Ensure that the flat side of the ball is pointed downward. Include facial features such as eyes, mouth and hair.
Fill in the marking with permanent markers.
Color the wooden spools the permanent markers to match your overall color scheme. For example, if you want your doll to be wearing a red “shirt” and blue “pants” color five of the spools red and five of the spools blue.
Color two of the wooden beads the same color as the doll’s “pants” and color two of the beads a dark brown or black to represent shoes. Leave the two remaining balls natural color to represent hands.
Measure 18 inches up the cord, and make a cut. This should leave one piece of cording 18-inches long and the other piece 10-inches long.
Fold the 18-inch piece of cording in half, thread one of the “shirt” spools through the bottom of the cording, and position it about one inch from the top loop. Thread one of the “pants” pieces right below the “shirt” spools.
Spread the bottom of the cording outward to make the legs of the doll. Slide a spool up each piece of the cord followed by a color “pants”-colored bead. Position another pants’ colored spool up each piece of cording, followed by the “shoe” colored bead.
Tie a loose knot at the end of the legs and set aside.
Tie a knot at one end of the 10-inch piece of cording. Thread the natural bead on first, followed by the four remaining “shirt” colored spools and the final natural bead.
Thread the completed 10-inch cording through the loop formed at the top of the 18-inch cording piece. Center the arms of the doll through the loop, leaving enough room at the top of the loop for the doll head. Knot the ends off and trim away excess cording.
Even-up the legs on the doll, and center them as necessary on the cording. Knot off the legs, and trim any excess cording off.
Glue the top doll head to the middle shirt spool with the hot glue gun. Hold the head in place until the glue sets.
Alter the size and number of the beads to suit your preferences. Just make sure that the cording can fit through the holes in the spools and the beds.
“The Complete Photo Guide to Doll Making”; Nancy Hoerner; 2010