Skip to main content

How To Make Teaspoon Rings

I first saw teaspoon rings displayed at a recycled clothing shop called “Scavengers” in Brunswick. An interesting idea, they tickled my fancy because they looked cool and also appeared tough enough to last for years (very important, if you are a ring-basher!)

I spoke with my father, a prior engineer, and he guided me in making a number of teaspoon rings – from what tools to use, to what metals worked best. This article is a guide to what we learned in our experiments in making teaspoon rings (neither of us had made them before).

There are many different styles of teaspoon rings you can make - from using souvenir spoons (like the ones in this article) to using plain spoons and engraved spoons. Teaspoon rings are also ideal for mens jewelry and are fairly easy and quick to make.

This teaspoon ring was made with an enamelled souvenir spoon.

This teaspoon ring was made with an enamelled souvenir spoon.


Choosing The Right Metal

It is important to choose a suitably malleable metal to work with as some metals are not easily bent or cut. Here is a list of teaspoon metals to look for or avoid:

Very hard to bend, cut and drill. Avoid stainless steel spoons unless you want a painful afternoon where all your tools get broken!

Very easy to bend, cut and drill.

Fairly easy to bend, cut and drill.

Not as hard as stainless steel to work with, but can be prone to rust. If the steel is chrome plated, you may find that flaking occurs when bending the metal and this will destroy the surface of the ring (as well as being sharp on skin).

Can be handled, but tends to rust where it has been trimmed, so not a good idea.

Very easily manipulated and highly recommended for making a teaspoon ring. Although the brass will show through on the cut, if the cut is facing inward, you won’t even notice it.

This is the easiest metal to work with and can be bent with the fingers. The only problem is that it can bend out of shape when worn.

When you slice a coated brass teaspoon, you will see the brass inside it.

When you slice a coated brass teaspoon, you will see the brass inside it.

The first step is to hammer the teaspoon part flat. Use a block of wood on softer metals to prevent marking.

The first step is to hammer the teaspoon part flat. Use a block of wood on softer metals to prevent marking.

Cutting the end of the spoon off with a dremel.

Cutting the end of the spoon off with a dremel.

An example of chrome flaking.

An example of chrome flaking.

Filing (smoothing) the end of the spoon after it has been cut.

Filing (smoothing) the end of the spoon after it has been cut.

Shaping the first part of the ring around a stake or mandrel.

Shaping the first part of the ring around a stake or mandrel.

Adjusting the ring to fit, after it has been shaped.

Adjusting the ring to fit, after it has been shaped.

Choosing The Right Shaped Teaspoon

There are lots of great teaspoons to pick from, if you follow the metals guide above. Antiquey-looking spoons with lots of ornamentation look great, as do enamel badged souveneir spoons and spoons with engraved text on the underside.

Spindly spoons make nice rings, however you need to look out for potential weak points in the metal that could cause issues when bending multiple times.

Scour op shops, antique shops and markets for cheap teaspoons that will make great rings.

Suggested Tools

There are many different ways to make teaspoon rings, but for the styles shown in the photos, my father and I used the following tools:

A stake (cast iron ring mould) or mandrel (ring mould)
Wet & Dry sandpaper
A smooth metal file
Lockable pliers
A bench vice
A dremel (for cutting)
A standard hammer or engineer’s hammer
A rubber mallet (for avoiding marks when hammering imprintable metals)
A block of wood

Making The Teaspoon Ring

The process we followed to make a teaspoon ring is as follows:

1. Hammer the spoon part flat. Use a block of wood on top to avoid marking it during hammering.

2. Cut the spoon part off from the stem using a dremel (unless you plan to use it in the ring).

3. File the cut end with the smooth file, taking care to file each side the same amount of times and rounding the corners. Use long, smooth strokes and reduce vibration by holding the metal as close to the file as possible, as well as balancing the end on the edge of a block of wood. Bevel the edges if desired. Finish the filing by rubbing Wet & Dry over the end to smooth.

4. Once the end is ready, position it just off centre at the small end of the stake (or you can use a mandrel with a vice) and hammer it to form a curved hook, like a “C”. You may need lockable pliers to hold the end in place, especially if using a vice.

5. Position the hook on the stake/mandrel just off centre and move the stem to a wider thickness. While hammering, turn the stem around slowly until you have a ring shape. Try on the ring and determine the fit (which can be marked on the stake/mandrel for future reference). If using a mandrel in a vice, you will need to keep clamping and unclamping it to turn the ring.

6. To adjust the ring size once the ring shape is formed, use lockable pliers or pliers to bend and hammer the ring to the right shape. Note: be careful of weak spots in spindly areas or they will snap with too much handling.

Scroll to Continue
The back of the souvenir teaspoon ring.

The back of the souvenir teaspoon ring.


Do not bend any enamel badges or they will fall off. The designs we came up with allowed the enamel badges to stay flat and I recommend keeping them intact by allowing the ring to cross over an extra finger (see "back of teaspoon ring" photo to the right).

Also note that the less the metal is bent, the stronger it will be. Avoid excessive bending, otherwise undesirable work hardening occurs as the crystal structure in the metal changes.

Note that the “C” hook may dig into your finger a bit - if this is the case, use the “C” hook to shape the ring initially, then use pliers and lockable pliers to make the hook less curved.

Three of the teaspoon rings we made out of souvenir spoons.

Three of the teaspoon rings we made out of souvenir spoons.

Thanks For Reading!

I hope you enjoyed finding out more about making teaspoon rings. My father and I are quite proud of the results and plan to make many more.

We have already had a go at the plain teaspoon rings (without enamel designs on them) and followed the same process, only using teaspoons with fancy handles to make them a bit more exciting.

Teaspoon rings are a great addition to any eclectic jewellery enthusiast’s collection and certainly attract compliments (especially the enamel-badged souvenir ones over two fingers).They are also easy to make (as long as you have the tools) and would be ideal for selling at markets and so on.

I have also seen steampunk, punk, gothic and Americana teaspoon ring designs for men, which are very sought-after, embodying classic cool with handmade upcycling.

Like this article? Vote for it below!


You may also like:


© 2013 Suzanne Day


Susie Lehto from Minnesota on July 23, 2015:

This brought back memories of a teaspoon ring that I had years ago. I'm not sure whatever happened to that ring. It would kind of fun trying to shape one and this hub useful for learning how to, Suzanne. - Kudos!

Peggy Woods from Houston, Texas on May 28, 2015:

What a cute idea! There are many of those types of collector spoons which can be found in thrift shops, etc. Thanks for the how to do lesson! Up votes and will pin to my crafts board.

Suzanne Day (author) from Melbourne, Victoria, Australia on November 16, 2014:

Hi Frogyfish, no I haven't tried working with stainless. When I made the teaspoon rings, my father, who used to be an engineer, advised me that the stainless where hard to work and showed me a quick example. They can still be worked, it's just a lot more effort. So give one a go and see what happens!

frogyfish from Central United States of America on November 16, 2014:

Fresh and interesting information you presented. I was disappointed to learn that the stainless (under silver) were hard to work with as I recently bought several beautiful spoons of this type at a thrift shop for my daughter to give ring-making a try. Maybe she'll have to make just a brooch, as the handles were pierced and decoratively beautiful. Have you also done this perhaps?

Devika Primić from Dubrovnik, Croatia on March 07, 2014:

A creative idea and you have accomplished a useful, and informative hub.

Susan from India on December 17, 2013:

Wow... This is simply amazing. I never thought of it. Thanks for sharing Suzanne. Voted up.

Vespa Woolf from Peru, South America on December 10, 2013:

What a unique way to use up old teaspoons! I have a necklace made from a fork. The tines are curled around a large, colorful stone. This ring would be a nice addition to my jewelry collection. Thank you for sharing.

moonlake from America on December 05, 2013:

How neat I have so many of these little spoons and nowhere to put them now days. Voted up.

Joe Poniatowskis from Mid-Michigan on November 23, 2013:

This is cool - going to try this.

Suzanne Day (author) from Melbourne, Victoria, Australia on November 08, 2013:

Thanks everyone - I'm glad you like the novelty of making teaspoon rings. If anyone makes one, feel free to let us know how it turns out. When I did the above tutorial, I ended up with about 10 rings, because it was easier to do a few after getting the equipment ready.

SolveMyMaze on November 08, 2013:

Interesting hub! I never thought about making a ring out of a teaspoon.

You've made a cracking hub here and the steps are well laid out and really easy to follow for anyone wanting to make their own teaspoon rings.

Chitrangada Sharan from New Delhi, India on November 08, 2013:

This is an interesting idea!

I am going to give it a try with your instructions and helpful pictures.

Thanks for sharing this useful and interesting idea!

Kristy Callan from Australia on November 06, 2013:

This is such a cool idea! I used to collect teaspoons (well, we all need hobbies), so have quite a few collecting dust. Maybe I'll give this a try with a few of them.

I've also seen earrings at a craft market made out of teaspoons. The spoon was cut in half, with one half being used for each earring (so the pair were mismatched... one had the spoon bit and the other had a decorative handle)

Thanks for the informative and detailed article!

Suzanne Day (author) from Melbourne, Victoria, Australia on November 05, 2013:

Hi Marisa, I think this is how it's done for market stalls and suchlike. There would be no need to recast the metals, when simply bending them around an anvil is easier. I've also seen fork rings and teaspoon bracelets as well done with similar techniques.

Kate Swanson from Sydney on November 05, 2013:

What a clever idea! I made quite a bit of money once, reselling old souvenir teaspoons on eBay. I wonder if the buyers were doing something like this with them?!

Related Articles