Updated date:

How to Make a Beaded Spider

Author:
beaded-spider

Make a Beaded Spider for Jewelry or Decoration

This beaded spider is an ideal Halloween decoration or traditional Christmas tree ornament. Large spiders make great pins and pendants, while smaller ones can be used as earrings, rings, and accents on purses and hairpins.

Beaded Spider Overview

The beaded spider project is great for kids (with adult supervision when cutting wire) or is a fun introduction to the art of beading with wire. You should be able to complete a beaded spider within a few minutes, if you make a simple spider, or perhaps an hour, if you use a lot of beads and make a highly-decorated spider.

Beaded Spider Materials

Seed Beads (Optional): Use for eyes and beaded legs

Two Different Size Beads: Head and Body

Stringing Material: I used wire so I could pose my spider, but you can use nylon monofilament or other stringing material. If you use beads with large holes, you could use pipecleaners and bend them, to make the project easier for kids to do and to eliminate the need to cut the wire.

Wire Cutters

Round Nose Pliers

Find Beaded Spider Materials Online

beaded-spider

Beaded Spider Step 1:

You will need two beads, one for the body and one for the head. I have used two crystals (10 mm and 6 mm), but you can use pearls, rounds, bright polymer clay beads, or any beads that strike your fancy. Will your spider have eyes? I gave this spider 4 eyes (or 2 eyes and 2 fangs), but your spider could be completely different! After you select your beads, string them onto the wire (still attached to the spool) in this order: body, head, eyes. Choose a wire that is thin enough to fit through your beads, but wide enough to be strong. I used 24 ga dead soft wire (any craft wire you get will be soft). Half-hard would work, but full-hard may be too stiff to bend.

beaded-spider

Beaded Spider Step 2:

If you have beads for eyes, wrap the free end of the wire below the beads to form a loop. Wrap the wire a second time to secure it and cut it flush. Use pliers to push any sharp edges into toward the head bead. If your wire is thin enough, you can twist the wire together under the eyes and then hide the ends inside the body. Use the same technique for 2 or 3 eyes. If you don't want eyes, you could use a long head pin instead of wire.

beaded-spider

Beaded Spider Step 3:

I wanted to use the same wire for the legs that I had used for the spider, so I went ahead and cut my wire, leaving several inches below the body bead. If you are using different wire for the legs, you may prefer to keep your spider on the spool of wire until you are ready to finish it.

Learn to Make More Creations with Beads and Wire

beaded-spider

Beaded Spider Step #4:

Cut 4 lengths of wire to form the legs. My pieces are each about 6" long (which is more than I needed). Thicker wire makes stronger legs, but it also makes it harder to wrap the legs between the head and body beads. Select a wire thickness in keeping with the overall size of your spider (I prefer 22 or 24 ga). You won't be able to use thick wire if you have small head and body beads. For small spiders, you may want to use 2 wires to make 4 legs (it still looks like a spider). Grasp all 4 wires together at their middle and wrap them once around the wire between the head and body beads. Pull tightly to snug the wrap around the main wire.

beaded-spider

Beaded Spider Step #5:

You can arrange the wires as legs and cut them to the desired length or you can add beads to them. I'm a bead addict and I like to add seed beads and sometime short bugles to the legs. To bead the legs, add the beads in your choice of pattern and length, push them securely against the body, and then make a loop or simply bend the end of the wire back from the last bead. I like to make loops because they give me more points from which to hang the spider.

beaded-spider

Beaded Spider Step #6:

Here is my spider with all 8 legs beaded. I pushed the spider down toward the finished end and made a wrapped loop below the body bead. These spiders look great with clear monofilament attached to the loop. If your legs are long enough, you can run monofilament through their ends to give your spider the appearance of spinning a web.

beaded-spider

Beaded Spider Step #7:

Here's another spider, this time with 2 eyes and unbeaded legs. This spider was made using 26 gauge enameled green wire. This spider doesn't have any loops. Spiders with no loops work well attached to a pinback or onto a barrette (watch those legs!). If your wire ends are sharp, use a cup burr or file to smooth the ends.

My kids were fascinated by this project, so I gave them pipe cleaners (chenille craft wires) and acrylic crystals and let them make their own spiders. It's a great family project, but do be sure to use care when cutting your wire. Please feel free to send me pictures of spiders you make using these instructions (jewelrymaking@allinfoabout.com) and I will place them in a gallery for everyone to admire.

Video of Making a Beaded Spider

This is a nice example of a bead and wire spider that you can make. This video demonstrates how to use tools to complete your spider.

Sign the Beaded Spider Guestbook!

anonymous on March 11, 2013:

I made one in black and it looks great!

anonymous on September 17, 2012:

OH this is so cool and is going to be sooo fantastic!!!! THANK YOU SO MUCH HALLOWEEN IS GOING TO BE AMAZING!

anonymous on July 10, 2012:

Hi thanks for your tutorial , very easy to follow . Have made two spiders so far , one small & one large am now addicted even though i hate spiders. Am now sending one to a friend in Texas.

anonymous on October 26, 2011:

Our girl scout troop made these spiders last year and they were a huge hit. My daughters wore them to school today on a chain. By far one of the coolest crafts we have done.

anonymous on October 16, 2011:

I enjoyed making this spider. It was quick n easy to follow the instructions. I made a pair of earrings n they turned out awesome. Thanks =)

anonymous on November 22, 2010:

Thank you for showing a very good tutorial. I know it is time consuming and it takes a lot of generosity from your part to do this. We appreciate it. Thanks again.

anonymous on August 14, 2010:

This is so cool. I'm going to have a go just because it looks like a lot of fun to make. Thanks for posting this and sharing.:)

anonymous on July 17, 2010:

can't wait to get started you make it look so easy your a clever lady, thank you

anonymous on July 14, 2010:

i love that beaded spider, hope i get it right.

developdm on April 14, 2010:

Good lens. So creative lens. I like best to create something own. Really it fantastic and creative.Thanks for sharing such like post.

anonymous on October 11, 2009:

I need a "spider" for my daughter's Halloween modeling photoshoot. I've been trying to figure out something pretty that wouldn't break the bank. These are perfect!!!!!

anonymous on July 29, 2009:

Perfect little craft for me to have several different pins...Its so fun to be able to "play" with my name.

anonymous on June 17, 2009:

first pretty spiders ive ever seen i think ill try my hand at them lol thank you

StephanieB-Writer on May 31, 2009:

These will be great at Halloween! I'm going to favorite it for then.

Mortira on January 10, 2009:

Great tutorial! Welcome to the Beads and Jewels group!

RickBasset on January 03, 2009:

These are awesome! I Think my boys might like to make these. Thanks for the idea and clear instructions!